MakerJuice SF for the Form 1/+/2 - 3D Printing Resin
This is our blend of SF made for the Form 1/+/2 printers. All prints using any of the colors we sell for the Form 1/+/2 should be done using the PreForm “Black 2” setting. For Form 2 printers, you must put the printer in "Open Mode."Color Options:
SF is a great blend that provides slightly more bend than G+, while maintaining fast print speeds and precision accuracy. SF is ideal for printing any part that needs to be hard while not being brittle, SF is perfect for things like snap-fit parts.
SF has a high pigment concentration which produces bright and opaque printed parts, due to the higher viscosity the pigment does not settle out as fast.
SF, like all of our resins, cures under UV A, B, and C light up to around 420nm. You can cure it with a DLP projector, a UV laser, or UV leds. When using UV lasers or LEDs, the cure time is extremely fast, so you don’t need much power.
This resin is low odor and contains zero VOC.[printer_settings] All prints using any of the colors we sell for the Form 1/+/2 should be done using the PreForm “Black 2” setting. For Form 2 printers, you must put the printer in "Open Mode."
Our unpigmented resins are not designed to be used without pigment. They are here only so you can mix your own colors using the pigments we have available. They will not print well (or at all!) without pigment added.